收藏本站

AGX
NOTES
1. Switch mounting
Mount the switch with the hole cutting
dimensions shown in the drawing.
2. Adjustment of the operating device:
With respect to the position of the
operating device and the switch body, set
the position as indicated in the condition
on the right. If this condition is exceeded,
the mechanical and electrical
performance will be impaired. In addition,
the force applied by the operating device
should be in a perpendicular direction.
Even if the pushbutton is used in the full
total travel position, there will be no
in?uence on the life of the switch.
3. Con?rming insulating distance
Before mounting and wiring, the
insulating distance between terminals
and between the terminals and ground
should be checked for assurance of
proper distance. With respect to the
terminal connections, it is recommended
that receptacles with insulating sleeves or
“Positive Lock Connector*” be used. Also
consideration should be given to the
wiring not to apply force to the terminal
section normally.
*Registered by AMP, Ltd.
4. Regarding fastening lead wires to
terminals
the sockets you are using.
5. Material of the panel
Steel sheet is recommended as the panel
material. When using soft material,
con?rm the condition for actual use.
6. Quality check under actual loading
conditions
To improve reliability, check the switch
under actual loading conditions. Avoid
any situation that may adversely affect
switching performance.
7. Avoid using and keeping switches
in the following conditions.
? In corrosive gases
? In a dusty environment
Operating
device
O.T. 2mm type: 8mm min.
O.T. 4mm type: 10mm min.
O.T. 2mm type:
2.4 to 3mm
O.T. 4mm type:
2.4 to 4mm
Use .250 receptacle (terminal thickness
0.8mm) or .110 receptacle (terminal
thickness 0.5mm) should be used for
connection. Make sure the sockets are
? Where silicon atomosphere prevails
straight. If they are skewed, the terminals
will require excessive insertion force. The
insertion force varies according to
Free condition
REFERENCE
Operating condition
manufacturer’s speci?cations. Check it for
1. Outline of UL1054 test
Overload test
2. Outline of EN61058-1 test
After switching 25,000 times on the
50 to 100ms
Standard type: 12.5A 250V AC
(Power factor 0.75 to 0.8)
Endurance test
Standard type: 10A 250V AC
(Power factor 0.75 to 0.8)
above load condition at both 85 +50 ° C and
25 ± 10 ° C, temperature rise of terminals
should be less than 55 ° C and no
abnormality should be observed in
characteristics.
18A
2 sec.
4 sec.
10A
AC: 250V
(Power
factor 0.6)
After testing, temperature rise of
terminals should be less than 30 ° C and
no abnormality should be observed in
characteristics.
INTRODUCTION OF CONNECTORS (made by Nippon Tanshi co.,Ltd)
1. For 2 Form A power switching
contact type
2. For 2 Form A power switching
contact type of 2 Form A power
switching contact + 1 Form A signal
switching contact
For 2 Form A power
switching contact type
For 2 Form A power
switching contact type
of 2 Form A power
switching contact type
Applicable AGX switch part No.:
AGX205F, AGX206F
* Housing
Model number: N1620-4204
* Receptacle
Model numbers
17168-2 (for narrow wires, post-plated product)
17168-M2 (for narrow wires, wood veneer
Applicable AGX switch part No.:
AGX706F
* Housing
Model number: N3220-4204
* Receptacle
Model numbers
plated product)
172131-M2 (for thick wires)
17901-M2, 17902-M2, 17903-M3 (wire size
differences)
Remark: Please consult us if you need above
connectors.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e
AECTB19E 201201-T
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
AH1482A-A SWITCH MINI SPST HINGE SILV PCB
AJ7212BTVF SWITCH ROCKER DPST 10A 250V
AJ8212BTVF SWITCH ROCKER DPST 16A 250V
ALS50-12 PWR SUPPLY 12VDC OUT 4.2A
ALS50-24 PWR SUPPLY 24VDC OUT 2.1A
ALS50-3.3 PWR SUPPLY 3.3VDC OUT 9.1A
ALS50-5 POWER SUPPLY 5VDC OUT 9.0A
ALS75-12 POWER SUPPLY 12VDC OUT 6.2A
相关代理商/技术参数
AGX-7BC 制造商:Cooper Bussmann 功能描述:BUSS SMALL DIMENSION FUSE - Bulk
AGX-8 制造商:Cooper Bussmann 功能描述:FUSE 8A 32V FERRULE - Bulk 制造商:Cooper Bussmann 功能描述:Cartridge Fuse 制造商:Cooper Bussmann 功能描述:Fuse Plug 8A 32V Fast 2-Pin Cartridge Holder 制造商:COOPER BUSSMANN 功能描述:Fuse Plug 8A 32V Fast 2-Pin Cartridge Holder
AGX-8.25MA 制造商:Cooper Bussmann 功能描述:AGX8.25MA
AGX-9 制造商:未知厂家 制造商全称:未知厂家 功能描述:Fuse
AGXD466AAXD0CC 制造商:Advanced Micro Devices 功能描述:MPU Geode GX 533 RISC 64-Bit 333MHz 3.3V 368-Pin BGD 制造商:Advanced Micro Devices 功能描述:Part Number Only
AGXD466AAXD0CD 制造商:Advanced Micro Devices 功能描述:MPU Geode GX 533 RISC 64-Bit 333MHz 3.3V 368-Pin BGD 制造商:Rochester Electronics LLC 功能描述:GEO IC OPN - Bulk 制造商:AMD 功能描述:
AGXD466AAXD0TD 制造商:Rochester Electronics LLC 功能描述:GEO IC OPN - Bulk
agxd466eexd0bc 制造商:Rochester Electronics LLC 功能描述:GEODE PROCESSOR - Bulk 制造商:Advanced Micro Devices 功能描述: 制造商:AMD 功能描述: